ADP1046是一款靈活的數字副邊控制器，設計用于AC-DC和隔離DC-DC副邊應用。ADP1046與ADP1043A引腳兼容，具有一些性能改進和新特性，包括電壓前饋、改進環路響應，以及可編程死區控制，以實現最高效率。ADP1046還為實現最低元件數量、最大靈活性和最少設計時間進行了優化。具體特性包括本地和遠程電壓檢測、原邊和副邊電流檢測、數字脈寬調制(PWM)產生、均流和冗余OrFET控制?？刂骗h(huán)路數字濾波器和補償功能已集成至該器件，可通過I2C 接口編程。可編程保護功能包括過流保護(OCP)、過壓保護(OVP)、欠壓閉鎖(UVLO)和過溫保護(OTP)。內置的EEPROM允許對集成的環路濾波器、PWM信號時序、浪涌電流和軟啟動時序進行廣泛的編程。通過內置校驗和及可編程保護電路，可靠性得以提高。全面的GUI簡化了環路濾波器特性的設計和安全特性的編程。工業標準I2C總線可用于訪問許多監控和系統測試功能。ADP1046提供32引腳LFCSP封裝，采用3.3 V單電源供電。

The ADP1046 is a flexible, digital secondary side controller designed for ac-to-dc and isolated dc-to-dc secondary side applications. The ADP1046 is pin-compatible with the ADP1043A and offers several enhancements and new features, including voltage feedforward, improved loop response, and programmable dead time control to maximize efficiency.

The ADP1046 is optimized for minimal component count, maximum flexibility, and minimum design time. Features include local and remote voltage sense, primary and secondary side current sense, digital pulse-width modulation (PWM) generation, current sharing, and redundant OrFET control. The control loop digital filter and compensation terms are integrated and can be programmed over the I2C interface. Programmable protection features include overcurrent protection (OCP), over-voltage protection (OVP), undervoltage lockout (UVLO), and overtemperature protection (OTP).

The built-in EEPROM provides extensive programming of the integrated loop filter, PWM signal timing, inrush current, and soft start timing and sequencing. Reliability is improved through a built-in checksum and programmable protection circuits.

A comprehensive GUI is provided for easy design of loop filter characteristics and programming of the safety features. The industry-standard I2C bus provides access to the many monitoring and system test functions.The ADP1046 is available in a 32-lead LFCSP and operates from a single 3.3 V supply.

特性：

Integrates all typical PWM controller functions7 PWM control signalsDigital control loopIntegrated programmable loop filtersProgrammable voltage line feedforwardDedicated soft start filterProgrammable dead time for improved efficiencyRemote and local voltage sensePrimary and secondary side current senseSynchronous rectifier controlCurrent sharingOrFET controlI2C interfaceExtensive fault detection and protectionExtensive programming and telemetryFast digital calibrationUser accessible EEPROMAPPLICATIONSAC-to-DC power suppliesIsolated dc-to-dc power suppliesRedundant power supply systemsServer, storage, network, and communications

The ADP1046 is a secondary side controller for switch mode power supplies (SMPS). It is designed for use in isolated redun- dant applications. The ADP1046 integrates the typical functions that are needed to control a power supply, such as Output voltage sense and feedback Voltage line feedforward control Digital loop filter compensation PWM generation Current sharing Current, voltage, and temperature sense OrFET control Housekeeping and I2C interface Calibration and trimming The main function of controlling the output voltage is performed using the feedback ADCs, the digital loop filter, and the PWM block. The feedback ADCs use a multipath approach (patent pending). The ADP1046 combines a high speed, low resolution (fast and coarse) ADC with a low speed, high resolution (slow and accurate) ADC. Loop compensation is implemented using the digital filter. This proportional, integral, derivative (PID) filter is implemented in the digital domain to allow easy programming of filter char- acteristics, which is of great value in customizing and debugging designs.

推薦閱讀：

ADP1046：隔離DC-DC副邊應用控制器應用詳解

摘 要：ADP1046還為實現最低元件數量、最大靈活性和最少設計時間進行了優化。具體特性包括本地和遠程電壓檢測、原邊和副邊電流檢測、數字脈寬調制 (PWM)產生、均流和冗余OrFET控制?？刂骗h(huán)路數字濾波器和補償功能已集成至該器件，可通過I2C 接口編程。可編程保護功能包括過流保護(OCP)、過壓保護(OVP)、欠壓閉鎖(UVLO)和過溫保護(OTP)。本文著重介紹了ADP1046的結構 組成及操作方法。