SMC1602A(16*2)模擬口線接線方式
連接線圖:
;;;;;; ---------------------------------------------------
;;;;;; |LCM-----51;; | LCM-----51;; | LCM------51;;;;;;|
;;;;;; --------------------------------------------------|
;;;;;; |DB0-----P1.0 | DB4-----P1.4 | RW-------P2.0;;;;|
;;;;;; |DB1-----P1.1 | DB5-----P1.5 | RS-------P2.1;;;;|
;;;;;; |DB2-----P1.2 | DB6-----P1.6 | E--------P2.2;;;;|
;;;;;; |DB3-----P1.3 | DB7-----P1.7 | VLCD接1K電阻到GND|
;;;;;; ---------------------------------------------------Keyboard接線
;; PS/2--------51
;;;;;;1 DATA------P3.4
;; 3 GND
;;;;;;4 VCC
;;;;;;5 CLK-------P3.3 接在51的外部中斷，觸發方式為低電平本程序源碼只供學習參考，不得應用于商業用途，如有需要請聯系作者。[注:AT89x51使用12M或11.0592M晶振,實測使用11.0592M]
[Keil uV2 7.01編譯運行通過 程序中沒有做鍵盤數據的奇偶校驗]=============================================================*/
#include
#include "scancodes.h"#define LCM_RW;;P2_0 //定義LCD引腳
#define LCM_RS;;P2_1
#define LCM_E;; P2_2
#define LCM_Data;;P1#define Key_Data P3_4 //定義Keyboard引腳
#define Key_CLK;;P3_3#define Busy;;;;0x80 //用于檢測LCM狀態字中的Busy標識void LCMInit(void);
void DisplayOneChar(unsigned char X, unsigned char Y, unsigned char DData);
void DisplayListChar(unsigned char X, unsigned char Y, unsigned char code *DData);
void Delay5Ms(void);
void Delay400Ms(void);
void Decode(unsigned char ScanCode);
void WriteDataLCM(unsigned char WDLCM);
void WriteCommandLCM(unsigned char WCLCM,BuysC);unsigned char ReadDataLCM(void);
unsigned char ReadStatusLCM(void);
unsigned char code cdle_net[] = {"www.cdle.net--"};
unsigned char code email[] = {"pnzwzw@cdle.net"};
unsigned char code Cls[] = {";;;;;;;;;;;;;;;;"};
static unsigned char IntNum = 0; //中斷次數計數
static unsigned char KeyV; //鍵值
static unsigned char DisNum = 0; //顯示用指針
static unsigned char Key_UP=0, Shift = 0;//Key_UP是鍵松開標識，Shift是Shift鍵按下標識
static unsigned char BF = 0; //標識是否有字符被收到void main(void)
{
unsigned char TempCyc; Delay400Ms(); //啟動等待，等LCM講入工作狀態
LCMInit(); //LCM初始化
Delay5Ms(); //延時片刻(可不要) DisplayListChar(0, 0, cdle_net);
DisplayListChar(0, 1, email);
ReadDataLCM();//測試用句無意義
for (TempCyc=0; TempCyc<10; TempCyc++)
;; Delay400Ms(); //延時
DisplayListChar(0, 1, Cls);

IT1 = 0; //設外部中斷1為低電平觸發
EA = 1;
EX1 = 1; //開中斷 do
;;{
;; if (BF)
;;;;Decode(KeyV);
;; else
;;;;EA = 1; //開中斷
;;}
while(1);
}//寫數據
void WriteDataLCM(unsigned char WDLCM)
{
ReadStatusLCM(); //檢測忙
LCM_Data = WDLCM;
LCM_RS = 1;
LCM_RW = 0;
LCM_E = 0; //若晶振速度太高可以在這后加小的延時
LCM_E = 0; //延時
LCM_E = 1;
}//寫指令
void WriteCommandLCM(unsigned char WCLCM,BuysC) //BuysC為0時忽略忙檢測
{
if (BuysC) ReadStatusLCM(); //根據需要檢測忙
LCM_Data = WCLCM;
LCM_RS = 0;
LC